PLEASE NOTE: THESE WALL PLUGS ARE NOT INTENDED FOR USE WITH PLASTERBOARD
(10 - 14 Gauge, 35mm Length, 7mm Drill Size)
(6 - 8 Gauge, 29mm Length, 5.5/6mm Drill Size)
Once desired location has been clearly marked, use a masonry drill bit to drill hole to the correct depth.
Clean out the hole from dust and debris then insert plug, you may need to tap it in.
Ensure that you use the CORRECT MASONRY DRILL BIT.
Allow a little extra depth (no more than 10mm) past the screw length if the screw is longer than the plug.
IF YOU HAVE ANY QUESTIONS OR ISSUES PLEASE TALK TO US FIRST