Mixed Size Masonry Wall Plugs - Brown and Red - 6 / 7 mm for Brick and Stone - NOT FOR USE WITH PLASTERBOARD

wall plugs brown and red

roll over the image to zoom in


Mixed Size Masonry Wall Plugs - Brown and Red - 6 / 7 mm for Brick and Stone - NOT FOR USE WITH PLASTERBOARD


£0.00
£2.49
Earn0
reward points



Product details

              PLEASE NOTE: THESE WALL PLUGS ARE NOT INTENDED FOR USE WITH PLASTERBOARD           

 

Each pack comes with: 
                        
80 Brown Plugs 

(10 - 14 Gauge, 35mm Length, 7mm Drill Size)

                    

60 Red Plugs 

(6 - 8 Gauge, 29mm Length, 5.5/6mm Drill Size)

                    

                       
  Once desired location has been clearly marked, use a masonry drill bit to drill hole to the correct depth. 

                Clean out the hole from dust and debris then insert plug, you may need to tap it in.

Ensure that you use the CORRECT MASONRY DRILL BIT. 

 

  Allow a little extra depth (no more than 10mm) past the screw length if the screw is longer than the plug.

 

IF YOU HAVE ANY QUESTIONS OR ISSUES PLEASE TALK TO US FIRST